Small Changes Result In Mold Damage Reduction In Arlington
Mold Damage Reduction
In Florida, mold growth is hard to abate. High humidity, closed up homes, poorly maintained or improperly sized air conditioning systems, and a host of household habits encourage mold colonies in the Sunshine State. SERVPRO stresses common sense solutions to keep mold growth at bay but also offers high-quality mold remediation services.
Persistent mold damage plagues you in your Arlington home. No matter what you do, it seems impossible to keep the musty smell and spreading colonies from reoccurring. Although we provide mold containment and removal through our well-trained technicians, we understand that mold is always present in the indoor and outdoor environment. Mold remediation is not complete until the source of moisture feeding the fungi is eliminated.
With that in mind, follow these tips to manage the moisture in various areas and appliances of your home that contribute to mold growth.
Do not allow sweaty clothes or damp towels, dish or washcloths to pile up. Launder clothes and linens frequently and dry them thoroughly. Keep the lint trap and vent for the dryer clear to prevent a buildup of steamy, hot air. Run the cleaning cycle on your washer at least weekly and clean the drains and seals regularly. Operate a dehumidifier and empty the condensation regularly.
Avoid hanging up wet or damp clothes, even if they are clean. Leave closet doors open to permit air conditioning to pull moisture from the air in those confined spaces.
Run the exhaust fan when cooking, especially if boiling liquids or sauteing. Hang up dish towels and dishcloths. Throw a few ice cubes into the garbage disposal to dislodge food particles and rinse thoroughly. Check the drain pan under the refrigerator for standing water or leaks. Ice maker lines should be inspected regularly.
This is another place that requires regular operation of the exhaust fan. Wipe down the shower and bathtub after use and hang up towels. Keep the door open to let cooled air from your AC to reduce moisture.
Make certain the size of your system fits the area to be cooled. Overdoing the capacity of the unit results in the AC shutting off before enough humid air in the home passes over the condenser coil. The small amount of water collected does not drain away and reenters the air, increasing the ambient humidity.
If you struggle with stubborn mold growth give SERVPRO of Arlington a call at (904) 721-2230. A mold remediation team will contain and remove the current growth. You have the power to limit recurrence by using the above hints.
Check out Arlington, Florida click http://www.visitjacksonville.com/areas/arlington/.